Why Are Airpods Quiet on Full Volume & How to Fix It?

Why Are Airpods Quiet on Full Volume & How to Fix It? | integraudio.com

Many Airpods users question why Airpods are quiet at full volume & how to fix it. If you, too, have ever experienced the low volume, even at full blast, you are not alone. 

Airpods may become quiet even at full volume due to hardware constraints or external interference. They can be quiet for several reasons, including a low battery or accessibility settings on your Mac or iPhone. There is no single explanation for why your AirPods can be underperforming in terms of volume.

Further, your Airpods’ performance depends on several factors, including the supported range, connectivity, device settings, and more. For that, we’ll go over some possible explanations, but remember that you need to do your experiments to determine the root of the problem.

Let’s discuss in a greater detail how to solve this issue:

11 Potential Ways to Fix Quiet Airpods On Full Volume!

The first thing to do if your Airpods aren’t working is to see if the issue is with all of the devices you use them with or if it’s specific to one. If you encounter a problem on a Mac, you can test if it persists on an iOS device by switching devices.

There are a few potential causes of the case with your Airpods. To solve the issue, adhere to the methods below.

Clean The Dirty Speaker Mesh

The headphones’ audio quality degrades when the Airpods’ speaker mesh becomes clogged with earwax, dust, or other debris. Dust and debris can enter most Airpods through a tiny aperture on the rear. Also, ear wax is another potential source of trouble that can affect the sound quality of your device. 

If your Airpods aren’t making any noise or are quiet, remove them and inspect the tiny holes on the rear of each pod. Follow the below steps to clean.

  • Since liquids can damage your Airpods, Apple suggests cleaning the delicate speaker mesh with a dry cotton swab. Swab away the buildup, but don’t apply too much pressure, or you might damage the speaker mesh.
  • Use a high-quality electronic gel putty or a soft bristle toothbrush for more involved cleaning tasks. 
  • With a steady hand and a SIM removal tool, tweezers, or a small screwdriver, you can carefully remove any remaining buildup from the speaker holes. Apple does not endorse this, do it at your peril.
  • Carefully scrape across the holes and around the edges until the wax is gone. Avoid pushing it further into the speaker mesh.
  • Using a dry, lint-free cloth, clean any residue after scraping away the gunk.
  • You could also take your Airpods to an Apple store and have them cleaned by a trained technician.
  • Finally, if you’re having trouble with the microphone on your AirPods, you can perform a quick Microphone test to diagnose the issue. Open the “Voice Memos” app on your iPhone and record a short audio clip while speaking into the AirPods. Once you are done with the recording, play back the audio to listen for any issues, such as low volume, distortion, or background noise.

Tip: Avoid using a wet cloth or swab to clean your Airpods, as this could damage the mesh speakers. Toothpicks and other sharp objects can puncture the speaker grille and cause permanent damage. Try blowing air in there with a hair dryer to clean the dust. 

Why Are Airpods Quiet on Full Volume & How to Fix It? | integraudio.com

Recaliber Airpods With iPhone

Your Airpods and iPhone may need calibration if they have different definitions of “full volume.” This could also potentially stop your Airpods from using the full range of audio. The whole scenario might seem something very complicated, but it is actually easy to fix.

  •  Insert Airpods and play music.
  •  Lower your iPhone’s volume. Airpods should be silent.
  • Swipe down from the top-right of your iPhone to open Control Center and tap the Bluetooth icon to disable Bluetooth. It will disconnect Airpods from iPhone.
  •  Play the music again using your iPhone’s speakers. Lower your iPhone’s volume.
  •  Open the control center and tap Bluetooth to reconnect Airpods. Reconnecting Airpods may require opening Settings, tapping Bluetooth, and then Airpods.
  •  Listen to music and adjust the volume.

Recharge Airpods and Reset

Your Airpods’ volume may lessen when the battery is low. Try charging your Airpods all the way and seeing if that helps. If you put your Airpods in their case and open the lid while they’re close to your iPhone or iPad, you can hear a volume reading.

On a Mac, you can view the battery life of your Airpods by clicking the Bluetooth icon in the menu bar and hovering the mouse pointer over the Airpods in the resulting menu. The battery indicator may malfunction even if it appears to have a full charge. So it’s reasonable to rule that out.

If your Airpods’ volume is too low on one device but not on others, the device or Bluetooth connection is at fault. Reset them by completing these steps:

  • With your Airpods in their case, click on the Apple menu and choose System Settings, then Bluetooth.
  •  Right-click or Control-click on Airpods, pick Remove and confirm.
  • Open the Airpods case and press and hold the setup button until it flashes.
  • Select Airpods when it displays in System Settings > Bluetooth.

Do A Volume Check For Particular Applications

First, check to see if the volume is turned up on the device in question; it may seem like an easy step, but it’s often overlooked. The Airpods don’t have a volume knob, so you’ll have to use your iPhone to adjust the volume of your Airpods. To increase the volume on your Mac, go to the Control Panel.

Verify that the app you’re using isn’t muted and that the volume is up.

Turn off Low Power Mode On Your iPhone or iPad

When an iOS device is set to Low Power Mode to conserve battery life, the volume may be lower than usual. That holds even if your Airpods are entirely charged. To disable the reduced power mode, simply launch the settings menu and tap on the battery option.

Lastly, deactivate Low Power Mode by tapping the corresponding switch.

Update Your Airpods, iPhone, Or Mac

If you haven’t updated your iOS device and Airpods since a new version became available, that could be the cause of their behavior. Upgrade both devices to the latest version, if possible. To see if either of these gadgets has any updates, you can:

  • Settings > General > Software Update on your iPhone.
  • Verify the Airpods’ firmware version in “Settings” on your iOS device.

Why Are Airpods Quiet on Full Volume & How to Fix It? | integraudio.com

Tweak Equalisation Settings

You can adjust the volume in the Music app’s equalizer. When using the Airpods, most of the EQ settings, even the ones named “Booster,” tend to reduce the volume of the sound. Ignore the EQ and listen casually. To return them to normal, change these options on your iPhone:

  • Choose EQ in Settings > Music.
  • If it doesn’t work, try toggling back to the “off” setting after trying a different profile.

Disable The Volume Cap On Your iPhone

This issue could result from an iPhone’s maximum volume setting. The purpose of this option is to guard your hearing. However, you can modify this by visiting Settings, General, Accessibility, and scrolling down where it says “Volume Limit.” This will allow your Airpods to deliver the total volume without the cap.

Even though you shouldn’t have any trouble using your Airpods with an Android device, keep in mind that the volume on most gadgets is capped to prevent permanent hearing loss.

Ask Siri For Help

Anytime you need a louder or softer volume on your Airpods, just ask Siri! It’s handier than constantly adjusting the iPhone’s volume controls, which might help to increase the volume a little bit at times. Simply telling Siri, “Hey Siri, increase/decrease AirPod volume by 50%,” will affect both headphones.

Make Good Use Of  Accommodation Feature

Headphone accessibility/accommodation may help you out if the volume is still low, even after trying the methods mentioned above. What accessibility features do is enable audio potential in real-time and increase the phone call volume. Take a look below to see how to make suitable use accommodation feature:

  • Tap Accessibility in Settings.
  • Select Audio/Video.
  • Turn on “Headphone Accommodations.”
  • Select Phone (which includes FaceTime and other video calling apps), Media (music, movies, podcasts, Siri, and other media), or both at the bottom of the screen.
  • Select an optimization profile under “Tune Audio For.” Play a song to hear the change in real-time.
  • Tap Custom Audio Setup to listen to samples and pick your favorite.

Ensure That Your Airpods Are Fitted Correctly

Make sure you’re using the right-sized ear tips for your ears to get the best possible fit, sound, and isolation from outside noise. There are three sizes of Airpods Pro ear tips: small, medium, and large, with an additional extra-small size, included with the second generation of Airpods Pro.

Airpods Pro comes with medium earbuds as standard. Insert them into your ears; if a good seal is not immediately achieved, try a different, larger tip. If the current size is too bulky, you may want to switch to a smaller one. Try the Ear Tip Fit Test if you need further confirmation:

  • Insert the Airpods into your ears.
  • Double-check that your Airpods are paired with your device over Bluetooth.
  • Access Bluetooth by launching the Settings app.
  • Select the Airpods and tap the More Info button.
  • Verify Proper Ear Tip Fit with a Tap.
  • Select Play after tapping the Continue button.

Why Are Airpods Quiet on Full Volume & How to Fix It? | integraudio.com

Conclusion

Several things, including hardware constraints, software issues, and environmental interference, can contribute to Airpods being quiet at total volume. The good news is that this problem is easily fixable with some quick fixes like cleaning your Airpods, restarting your device, or changing the EQ settings. 

Also, verify your Bluetooth settings and that your device is compatible with your Airpods. It might be necessary to get in touch with Apple support for additional help if none of these fixes works. In any case, you can restore your Airpods to total volume with perseverance and work. 

Don`t copy text!
Scroll to Top