Let’s talk about the looper plugins that we found and want to share with you!
DAW like Abelton Live is built for live looping and triggering live samples, and some other DAWs like Logic Pro and FL Studio have their looping plugins/workflow built into them. However, these tools may not be the best suited for your workflow.
There are more comprehensive looping & sequencing plugins in the market that you can use. We made a list of the eight best looper plugins and few free plugins that you can integrate into your workflow for live or studio purposes! Now, let’s dive into the list:
The 8 Looper Plugins For Music Production 2023
1. Audio Damage Enso
Enso is a virtual audio looper that lets you record and loop audio with several real-time effects in your DAW.
It allows you to record and playback up to 10 minutes of stereo audio multi-directionally at different speeds. The single-button loop engine is fully automatic and lets you add effects in a very tape-style fashion. Hence, even if it works as a modern looper, its sonic behavior is modeled after vintage tape machines.
- Intuitive Interface
The resizable GUI is stunning and uncomplicated, with the signal chain being straightforward and streamlined, making Enso easy to use and operate with, both in the studio and live settings.
- Tradition signal flow
Like old-school loopers, the plugin can have the input mixed with buffer content, after which it can be sent to effects, or like a tape looper, the feedback path contains the effects and speed changes using the Dub in Place button. One can also have four different start and end points, in which sector crossfades can happen.
It’s available as a VST, VST 3, AU, and AAX for Windows 8.1 or higher (64-bit only) and macOS 10.12 or newer, as VST and VST 3 for Unbutu 18 or later, and AUv3 for iOS or newer.
2. Audiomodern Loopmix (Loop Remixer/Sequencer)
Loopmix by Audiomodern is a creative loop remix and rearrangement plugin for transforming your loops into interesting and artistic sounds.
It allows you to work with loops unconventionally and mix full-length loops with one-shots, other loops, sounds, etc. It inspires new beats and songs and does detailed sound design. It’s also a good way to recycle old ideas, melodies, grooves, etc., into something fresh.
The plugin has a great preset management system, using which you can import presets, create preset packs, and browse through a great collection of sounds, including presets of Late House, IDM Kits, LoFi kits, and more.
Loopmix sequencer window has six tracks on which you can fix different loops on different time stamps. In addition, there are windows for rearranging, reversing, and adjusting density, volume, and pitch for different loops. That can help you create interesting loops and track beds. You can also set the tempo for the Loopmix session.
It’s an interesting and creative way of creating drum loops, melody loops, basslines, and other elements. You can also drag in your loops, slice them, pitch them, edit them, etc., and create something new. Using a MIDI instrument, you can also trigger different clips from six tracks.
- Multifunctional keyboard
You can arrange your stems and clips and assign them in up to two keyboard octaves to trigger sequences, loops, and arrangements with a single button click.
The plugin is available in VST, VST3, AU, and AAX plugin versions and is compatible with Mac OS X 10.12 or higher or Windows 10 or later operating system and 2 GB of hard disk space.
3. Sugar Bytes Looperator
Looperator is a sample slicer and fx platform designed by Sugar Bytes.
Looperator is a creative production tool that can help you transform simple sounds and samples into new, exciting, creative compositions. It slices the sample you load into chops, rearranges it, and adds different effects on a per-step basis to spice it up.
- Effect sequencer
The main interface of Looperator is centered around a 16-step sequencer. The sequencer controls six different effect modules. The idea is that you can sequence different effects to modulate a certain sound or song. Once you load Looperator on a track inside your DAW, you can sequence the slice, loop, envelope, filter, FX1, and FX2 modules to affect the sound. The interface is colorful, with each module’s color, while a dice switch at the far right of each module lets you randomize each sequencer for unpredictable results.
- Midi trigger
Looperator works in two modes, host and manual. In host mode, it’s synced with your host tempo so that you can create steps in time with the rest of the song. You can trigger certain effects in manual mode by playing midi notes. For example, you can set up a tape stop effect to be triggered every time you play the C3 note on a midi track. Now all you have to do is create that midi track and place it anywhere in your track, saving you time and CPU usage since one instance of Looperator can affect multiple tracks/sounds.
- Slice and rearrange
Looperator is extremely powerful when it comes to chopping up samples and rearranging them. Once your sample is warped, and in time with the project’s tempo you are in, you can load it in Looperator and sequence the slice module. It will create 16 chops of sound which you can place anywhere you want in the 16-step sequencer in any order. It’s a great tool for sampled-based producers who need a different approach to sampling.
- Perfect for live performances
A huge asset of Looperator is its compatibility with Traktor. Traktor is a DJing software used by many DJs. You can DJ with Traktor and simultaneously run Looperator as an FX processor. This can be achieved by running it on manual mode and bringing a midi controller with you to the club. You can map certain midi buttons to certain effects, which you can trigger while DJing to add extra spice to your performance. Similarly, it’s a great performance tool for those who perform with Ableton Live.
The versatility of Looperator comes from the countless effect choices it offers. You can select between 25 different filter styles, which include vowel options, bandpass, notch, and filter sweeps. You can even open up the filter styles and tweak them on left and right basis, creating so interesting stereo effects. Of course, you also have plenty of choices in distortion, reverb, pitch-shifting, tape-stop effects, and many more.
Looperator is available on Windows 7 or higher and macOS 10.12 or higher in VST2, VST3, AAX, and AU formats.
4. Devious Machines Infiltrator 2 (Multi FX With Looper Effect)
The Infiltrator 2 is a monstrous multi-effect that can combine, sequence, and adjust a whopping ten separate effects.
Devious Machines calls it a “turbocharged” update, and with 54 effects modules instead of the 28 in version 1, it’s evident the company has been hard at work. The layout is instantly recognizable, and existing customers can upgrade for no additional cost, which is a major plus.
You can utilize many copies of the same modules, and there are ten effect slots, user-editable multi-segment envelopes, and assignable macros, much like in the original Infiltrator. The amount of control you have in real-time truly sets it apart from other multi-effects. There are now two independent envelopes for each effect, each of which can be synced to a maximum of 128 bars in duration.
- A vast amount of effect choices
As we said, the infiltrator comes equipped with 54 effects. Some of them are pitch-shifting, FM, delay, reverb, looper, repeater, distortion, and numerous modeled filters. The filter choices are particularly exquisite, with options like comb filters, Model-20, Ladder, and 101-style filters available. You can have ten effects running simultaneously in your chain with multiple instances of the same effect running on different settings. Each effect comes with a dedicated interface with enough controls to allow for huge sound design potential.
When it comes to presets, it’s common for effects plugins that pack a punch elsewhere to fall short. This could be because some people view the use of presets as lazy. But we consider it presets to be a crucial demonstration of a plugin’s capabilities. Infiltrators 750 presets already quite a lot, but v2 more than doubles that number.
It’s an insane amount, but at least they’re organized into categories and subcategories. To jumpstart your imagination, check out the Sound Design folder, where you’ll find patches like Faller Robo 4 Bar and Inertia. Presets like Bit Meddler, Future Announcement, and Slick Shifter are just a few examples of the incredible variety of sounds you can create with this plugin.
- Distortion Module
A new “Degrade” setting has been added to the Distort module for all distortion fanatics. The degrading vibe of this loud and destructive processor becomes apparent at around 30%. Concerning reverb, everything has been rolled into a single module with three different settings (Reverb, LoFi, and the brand-new Void). An ‘infinite’-like effect is achieved at the highest settings, and the sound is textured overall.
- Master Section
An improved Master section with drive and compression is included in Infiltrator 2, and the same type of compressor controlled by a single knob is now available as a standalone module. The Master tab has a bass bypass option (40Hz to 1kHz), effectively disables all processing for frequencies below the specified threshold.
- Time Manipulation Modules
The modules that can alter past events are the most original additions. It’s great because of how simple it is to create tape slow-downs and reversals and how Stretch and Varispeed cover most speed ranges and spectrum. You now have many options for adjusting how your music is played back in time, with this new effect and others like the stuttering Looper.
This plugin is available for macOS 10.10 or higher (64-bit only) and Windows 7 or higher (64-bit only). It comes in VST/RTAS/AU/AAX formats and supports 32 and 64 bit systems.
5. Meldaproduction MSuperLooper
MSuperLooper is a multitrack loop station created for live performances.
You can load up to 16 tracks in the plugin so each track can have four loops. Hence, it is a serious option for users of DAWs like Studio One, Pro Tools, etc., that don’t have a live looper feature for triggering samples & clips for stage performances.
- Modular FX pipeline
Each track in the plugin can have its effect chain, for which the MSuperLooper gives plenty of options ranging from dynamics-based effects like limiter, compressor, transient processors, etc., to various EQ & filter effects, to modulation plugins like chorus, auto pan, phaser, etc., various reverb plugins, many distortion tools, and more.
- Easy workflow
The interface is easily understandable, with every single option labeled with text. For example, the recording button is labeled as “Record,” and then there are buttons labeled as “Previous” & “Next,” which makes the workflow simplified and easy, even for a newbie who doesn’t understand a DAW.
- Flexible Signal Flow
You can route the plugins & effects easily in a flow chart, a kind of diagram, wherein you can set what goes into what and what plugin comes after what. Further, you can adjust how you record MIDI data by clicking on the MIDI button, wherein you can adjust the MIDI channel, notes, values, etc.
The plugin is available in VST, VST 3, AAX, and AU versions and requires a minimum of Windows 8 or macOS 10.14 and Intel/AMD/M1 processors with SSE2 support or M1 support.
6. Looper Sequent
Sequent is an audio manipulation plugin for beat looping and sequencing.
Its building blocks are a looper, a routing window, a trigger window, a pitch-setting window, and a sequencer. The special thing about it is that you can apply many effects to the sounds and that any parameter of those effects can be step-sequenced within the plugin.
- Flexible audio path
If you’re an FL Studio user, you will relate the top window with the patcher plugin, allowing you to patch or route your audio signal in any direction you want. For example, you can route the looper and effects in any order or connection (series or parallel). The plugin has one stereo input and two stereo outputs (dry and wet). In addition, you can also set the mix of each effect.
- Effects Sequencing
When you click on an effect block, you will see the parameters of that plugin in the step sequencer window, for which you can program them as per the divisions. You can also set controls like sequencer length, random step selection, and more.
- Looper Effect
The looper effect allows you to set the trigger, repeat, slice length and offset, reverse, etc., values, like any beat looper. In addition, it also allows you to trigger audio clips/slices based on a tempo-sync delay and some advanced manipulations like pitch & pitch decay and more.
- Other Multi-effects
You can use some more effects like dual multimode filters, overdrive/distortion effects, gate triggering, panning effects, etc. Further, there are twelve available patterns in which you can save Sequent’s state if you want to.
The plugin offers a generative function that allows you to set all parameters to random positions and values. That is particularly helpful during creative blocks or when you lack inspiration.
Sequent requires a minimum of Mac OSS X v. 10.5 or later, or Windows XP or Windows Vista, or above, with x86-based processor 1.0Ghz, or above, with SSE, and 512 MB RAM.
7. Audio Blast InstaLooper3
Insta Looper is a glitch multi-effect and a live looping plugin.
The plugin allows you to loop audio in real time and applies musical pitch & time effects to it. You get four independent loops to edit, a parameter sequencer with 16 independent & automatable knobs, and sixteen steps sequencer with sequenced parameters.
You also get six integrated effects: Gate, Bit Crusher, Auto Pan, Filter, Phaser, and Time Expand, along with a dry and wet knob.
- Flexible workflow
All four loops have windows with the following switches: loop, FX, REV, and ON/OFF. Further, for every loop, you can select the same or different effects, set the loop size or length to different times, adjust the pitch & dry/wet knob, and tweak the parameter knob.
- Step Sequencer
The button can open the Step sequencer at the bottom of the main window and the option to load an oscilloscope for better visual feedback.
It’s available in NKS, AAX, Audio Unit, VST3, and VST2 plugin formats and is compatible with the following operating systems: Mac OS X, Mac Os 11, Mac Os 12, Windows 7, Windows 8, Windows 10, and Windows 11.
8. Arturia Spark 2 (Looper / DrumMachine)
Spark 2 is a drum machine and beat virtual creation tool for production, sequencing, and performance.
It’s a versatile drum instrument with sounds ranging from contemporary drums to physically modeled acoustic kits to modern EDM samples. On top of that, you can add effects and modulations to shape your sounds further sonically, sequence your sounds, and create interesting patterns.
It has 1900+ instruments and 180+ kits of every era & style, with nine variable-shape virtual analog oscillators, four multimode filters, six envelopes, 2 LFOs, and four mixers.
- Sound Engine
Spark 2 is a 16-track machine with virtual analog, sampling, and physical modeling music engines. You can do real-time or classic TR-style pattern-based step sequencing with the plugin. You can also get into detailed sound design & editing by using the modular synth engine.
The last nail in the coffin is the mixer with high-grade effects like compressor, reverb, bit crusher, multiband EQ, delay, distortion, plate reverb, destroyer, flanger/phaser/chorus, space pan, limiter, and more.
- Pre-loaded sounds
The pre-loaded libraries are of great quality and expansive, as they cover almost every genre of music and are created by industry professionals and well-known music producers & sound designers. In addition, there are more than 2800 instruments, including drums, one-shots, synths, and effects.
Tabbed pages, an expanded pattern edit section, a new mixer, and the sample management system make the interface easy and visually communicative. As a result, you can easily browse through the entire software uncomplicated and streamlined way.
You can create customized sounds using the synth engine that contain oscillators, multimode filters, ADR envelopes, LFOs, Mixers, CV processors, and more modulators & effects. Using the toolkit, you can sculpt your sounds however you want and do detailed sonic editing.
- Automation Editing
Spark 2 allows you to use the XY pad or the pencil tools to create & edit automation and patterns. The parameter of every instrument and plugin can be automated and edited easily.
- Step Sequencer
The in-depth step sequencer allows you to get creative and explorative with your sounds, with 32 steps of grid divisions for all sixteen instruments, on which the patterns can be easily visualized and drawn.
Spark 2 requires a minimum of Windows 7+ (64bit) PC: 4 GB RAM; 2 GHz CPU, or mac OS 10.8+: 4 GB RAM; 2 GHz CPU, and is available as Standalone, VST 2.4 (32-bit and 64-bit), AAX (32 bits with PT 10.3.8, 64 bits with PT 11), Audio Unit (32-bit and 64-bit) plugin.
5 Best Free Looper Plugins 2023
1. Harvest Plugins Harvest MINI (Looper/MIDI Sequencer)
Earlier, we looked at the full version of Harvest, which has slightly more advanced capabilities than this MINI version.
Fortunately, the primary Rhythm Tap function is accessible with this version. Having this function makes it very worthwhile to try out. However, the only downside is the limitation of the effects.
- Tap Your Rhythms
This interactive feature is excellent for anybody who likes to contribute to the feel of your beat, physically. Once you’ve set the general sequencer adjustments, all you need to do is either click to tap or map your hardware and tap there!
- Comprehensive Randomization
The randomization functions of this tool are great because they work within the bounds you determine for your session. This means that you don’t need to worry about things being changed to a different scale or step sequence, and whatever is randomized will be workable.
- Simplicity is Key
Although you don’t have access to the full spectrum of effects, the simplicity of this plugin has the potential to guide you in a new creative direction. When it comes to creating MIDI and musical phrases, you can still get the job done in a good enough way, and this will allow you to apply your creative processing at a later stage.
This plugin is available for Windows 7 (with SP 1) or later and macOS X 10.7 – macOS 10.13. It comes in VST format.
2. TugGlicento 2 (Looper/Sequencer)
TugGlicento 2 is a glitch creation plugin and looper/sequencer.
The main interface matrix is based on five tracks/loops on the y-axis, and grids on the y-axis, on which you can sequence the steps for each track. Further, for each track, you can control the number of grids, speed, duration, volume, pan, effects, attack, and decay time.
- Comprehensive Effects
You can load up five effects on the plugin from a bunch of options like reverb, phaser, ring mod, distortion, etc. Out of these plugins, you can choose one for each track. That gives you plenty of room to sculpt the sonics of your sound.
The plugin allows you to reset your entire sequencer such that each parameter in it is set to a random value. Similarly, you can also randomize the parameters in the effects. That especially helps in times of low inspiration.
- Addition features
You also get a multimode filter to select its cutoff frequency and q-value. You can also set the LFO frequency, shape, and depth, along with an ADSR envelope. That gives you enough room to create interesting modulations and movements.
It’s available in 64-bit VST 3 and AU plugin formats for both Windows and macOS and requires macOS 10.15 or higher or Windows 10 or later versions of operating systems.
3. ToneCarver Regen
ToneCarver Regen is a looper plugin designed for creating ambient and relaxing type sonic scapes.
It comprises four tracks, for each of which you can change the phase, modulation rate, modulation blend, and regen parameter. In addition, you can record a stereo track or loop, called “layers,” in all four tracks. The plugin has buttons for recording, replacing, and audio playback for the tracks.
- Tracks & layers
A track can have one or more layers stacked together. You can change the individual layer settings like rate, direction, pan, start offset, level, blend, etc.
- Playback & Recording
In addition to being a looper, the plugin allows you to audition, manipulate, or replay the recorded material. Playback Focus tells which track is affected when controls affecting playback are manipulated, and Recording Focus tells which track gets recorded when recording begins. However, they are usually synced to refer to the same source.
- Track summaries
So you can access the “views” window that shows you the track view and layer view. Using the layer view, you can shift the individual layers of recorded material in time, reverse, pan, gain stage, or restore them to their original states.
Regen is available as a 32- and 64-bit VST plugin for Windows only.
4. Audioblast Instalooper
InstaLooper is a free audio and effects looping plugin.
You can load and loop clips/samples of different sizes, pitches, etc., and add additional effects. You can create live effects while looping and manipulating your music. It has four tracks for which you get the size, speed knob, and reverse and effects on/off buttons.
- Simple Interface
The plugin can be instantly understood and used as it has an easy workflow you can set up in a few clicks and minutes.
You can set the effects for each track and choose from effects like bit reducer, auto pan, high pass filter, and phaser. The effects can be turned on or off.
The plugin is only available in VST 32-bit or 64-bit versions.
5. Quilcom Flooper
Flooper by Quilcom, or “fun” looper, is a unique, simple, and easy-to-work-with-free looping plugin.
Flooper has a simple interface, with the orange bar at the top marking the timeline of the loop. You can either sync the tempo of the looper to the daw or tap the tempo independently. There’s an additional metronome, dry/wet knob, loop knob, input level, and an output level knob.
The plugin allows you to record, latch, erase, or restart the audio playback. You can also reverse the audio or change its speed or pitch.
- MIDI Learn
You can easily assign the parameters to your MIDI device and record expressions via pedal & pedal latch.
The plugin is only available in VST 32-bit version for Windows only.
As we have seen, each looper plugin has a unique workflow, GUI, compatibility, and functionality. Some have great effects, some have great sequencers, and some have better sampling & editing workflow. It’s up to you to decide what best suits your workflow and stage needs.
However, Devious Machine Infiltrator and Arturia Spark 2 are absolute beasts regarding versatility and expandability. Spark 2 has one drawback, it’s more drums-focused, but it’s still comprehensive. Cyclop is great for bass sound design, in addition to it being a looper.
Other than that, Looperator is highly recommended as a sequencer and looper for LIVE and studio. Hope the article was of help and you derived some value from reading it. Thank you for going through it.
Shaurya Bhatia, is an Indian Music Producer, Composer, Rapper & Performer, who goes by the stage name MC SNUB, and is also 1/2 of the Indian pop music duo, called “babyface”. A certified Audio Engineer & Music Producer, and a practicing musician & rapper for more than 6 years, Shaurya has worked on projects of various genres and has also been a teaching faculty at Spin Gurus DJ Academy.