How to Fix Latency/Slow Pro Tools in 2024

How to Fix Latency/Slow Pro Tools

Are you having problems with latency when recording in Pro Tools? Today com talk about how to fix latency/delay in Pro Tools.

To get the most out of your Pro Tools recordings, it’s important to have a firm grasp of latency’s effects on your meetings. Modern computers are technological marvels capable of processing audio at lightning rates. However, even with such lightning-fast processing, you will still experience a few milliseconds of latency as the sound moves from your audio interface to your computer and then back again.

Playing along to a backing track can be challenging if you’re even a few milliseconds off because of how sensitive our ears are to this latency; usually, anything around 6ms will be audible as a delay. Thus, improved recordings and contented artists during tracking can result from an awareness of the causes and controls of this latency.

Let’s see how we can fix latency in Pro Tools.

How to Fix Latency/Delay in Pro Tools

To reduce latency in Pro Tools we need to make sure we have the Buffer Size set correctly as well as the Sample Rate. Also, Pro-Tools offers Low Latency Monitoring and Delay Compensation, so if you have a powerful PC and your sessions are not overloaded, enabling these settings will get rid of the problem quickly.

Adjust Your Buffer Size

When audio is processed within Pro Tools, an audio buffer is a portion of saved time. The buffer provides sufficient time for the audio to be processed, reducing the likelihood of glitches and interruptions. Your central processing unit will have an easier time processing audio if you increase the buffer capacity and the number of parcels.

  • Go to the Setup tab and click Playback Engine

Pro Tools Playback engine

  • Choose the buffer size from the drop-down menu

How to Fix Latency/Slow Pro Tools in 2024 - 2024 Update

  • Your session will restart

Adjust Your Sample rate

The amount of individual pieces of sound that are transmitted in one second is known as the sample rate. The smaller the sample rate, the less strain is placed during audio production.

Why would anyone want to increase their CPU usage by going higher than the default sample rate of 44100Hz in Pro Tools? Some producers prefer to sample at greater rates, such as 88.2 kHz or 96 kHz, to achieve the highest possible level of audio quality.

This is especially helpful when stretching audio; when you stretch an audio file, the samples are spread out over an extended period, and the sample rate is lowered. Therefore, if you have a greater sample rate, you will end up with a result that sounds better.

Because the vast majority of commercial music is created using a sample rate of either 44100Hz or 48000Hz, it is perfectly acceptable for your machine only to be able to process the earlier of these two options.

Adjust Sample Rate Scarlett 18i20

Low Latency Monitoring

Compared to the capacity of the 64-sample buffer, this method is much quicker; however, it comes with a few disadvantages. If you want to transmit audio to your headphones from the digital outputs 7/8, you won’t be able to use an aux bus because you can only use the analog outputs 1/2.

It is important to remember that any active plugins on a track will be disregarded when monitoring or recording a file. However, the latency is extremely low in this configuration if you can work with headphones that have the same mix as your control-room speakers and are willing to skip plugins on the track you are recording on. Both of these requirements must be met.

Low Latency Monitoring

Zero Latency Monitoring

Sending input signals straight to the analog domain’s outputs eliminates any sonic degradation that could have been caused by delay. This is accomplished by completely bypassing Pro Tools. Note that in this configuration, unless you silence a track you are recording, you can hear both the direct input and the signal returning from Pro Tools.

This is the case even if you mute the track you are recording. For the artist to be able to overdub parts, they will first need to hear what they have already recorded on the track. You can resolve this issue by manually muting the record track at the drop-in location. This is because mute automation is disabled when a track is set to record mode.

Use an Analogue Mixer

You can take the concept of zero-latency monitoring provided by the M Box one step further by using a dedicated monitoring mixer. Mic preamps from a separate unit can be routed to the Pro Tools interface and the headphones.

Alternatively, the mic preamps from a mixer can be used to place Pro Tools “in line,” which is analogous to how we used to connect analog multitrack recorders in the past. This patch provides you with a customizable zero-latency alternative, despite its portability being inferior to that of the alternatives.

How to Stop Latency While Recording in Pro Tools | Echo or Delay in Headphones

Get Rid of Old or Unused Recordings

One simple method to cut down on delay time is to get rid of old tracks and clips. You Can reduce delay in a Pro Tools project by eliminating unnecessary components. Just right-click the clip’s header to remove an audio or MIDI file. You can also hit Delete or click the icon in the clip’s upper left corner. Right-click the recording number or name and select “Delete” to remove it.

Install ASIO4ALL

ASIO4ALL is a Windows-compatible audio driver optimized to lessen audible delays. Compared to other driver kinds, ASIO4ALL reduces CPU usage and improves responsiveness during playback.

Just go to this link to get ASIO4ALL. When the driver is loaded, go to the Options menu and click Audio Settings. Finally, pick “ASIO4ALL” from the Device menu.

Free Up Hard Drive Space

Clearing out unused programs and folders can improve Pro Tools’ performance. Remove unnecessary folders from your computer to see if that helps with FL Studio latency. You can do it by hand by picking and deleting files, or you can use a disk cleaning utility to do it instantly.

Upgrade Your Computer’s RAM

RAM is an integral part of your machine. It’s the secret to your computer’s lightning-fast performance. The most effective method to decrease latency in Pro Tools and speed up your computer’s processes is to increase its RAM.

7 Crucial Tips to Optimize your PC For Music Production in 2023


Decreasing the Buffer Size is the most effective means of overcoming the latency issue. It allows for appropriate drop-ins while still allowing the plugins and aux send to be active on your record tracks, musicians to hear reverbs, and the like while tracking.

If you have a fast computer and fast drives, this is the best method to work, though you will need to limit the number of tracks and the number of plugins you use. Drop-ins are more difficult because the performer won’t be able to hear what you’ve already recorded unless you’re a master of the mute buttons. If the delay is a constant source of frustration, consider upgrading to a newer, more powerful machine.

Don`t copy text!
Scroll to Top