Although Bluetooth headsets are currently popular, many people still choose wired headphones because they have many advantages. You don’t have to be concerned about losing the headset while exercising or running out of battery because it doesn’t have to be charged to use.
Unfortunately, the headphone cord always seems tangled up when stored in a pocket. Making you waste time and tired of removing the wire every time you use it. This must be a common problem for wired headset users. But you don’t need to worry anymore, the following article will immediately reveal how to avoid making the headset cord wrapped quickly and simply. So stay tuned for tips and tricks.
How To Stop Headphone Wires From Twirling
To prevent the headphone cord from getting twisted, we must first know how to neatly roll up the thread after using it. If you need to learn how to roll up the headset, the life cycle of the headset will likely be concise by accidentally damaging the headphone wire circuit.
So, here we will share with you four ways to roll up the headphone cord to avoid damage to the audio device.
- Wrap the headphone cord in a circle.
Step 1: Straighten four fingers, and use your thumb to fix the earphone tail as shown.
Step 2: Wrap the rope into a ring with four fingers, the thumb fixes the wrapped loops.
Wrap until the end of the wire close to the volume rocker, then stop.
Step 3: Wrap the remaining wire around the previously wrapped part to fix it.
And here is the result after wrapping is done.
- Wrap the headset in a double-wrap style.
Step 1: Make a fist and stretch out your index finger, thumb, and little finger as shown.
Step 2: Use your index finger and little finger as a bracket, your thumb fixes the headphone cord.
Step 3: Wrap the rope around the index and pinky fingers. Wrap until the unwrapped part is about 10cm, then stop.
Step 4: Thread the remaining wire around the rope’s body just wrapped to fix it.
And this is the result:
- Wrap the headphone cord in figure 8
Step 1: Make a fist and straighten your index finger and thumb.
Step 2: Use the remaining three fingers to fix the earphone tail about 10cm long, as shown.
Step 3: Wrap the string diagonally along your index finger and thumb into figure 8.
Step 4: Fix the rope just wrapped with the end of the rope at first.
And this is the result:
The headphone cord is wound in figure 8
- Wrap your headphones in a paper clip.
Step 1: Prepare a paper clip and a headset to wrap.
Step 2: Thread the headphone cord into the paper clip core. Then, fix the wire with two clamps.
Step 3: Wrap the wire around the two paper clips.
Step 4: Thread the end of the wire into the clamp as shown to fix it.
And this is the result, as you can see the inner earphone cord is more compact when wrapped in a paper clip.
How do you stop wires from tangling?
Untangling headphones can be a frustrating and time-consuming task. Fortunately, there are several ways to prevent cords from getting tangled. In addition to using a cord organizer or wrap, you can avoid the frustration of dealing with tangled cords by following the below methods.
- Use a short headphone cord of less than 46cm.
The length of the headphone cord is calculated as the longest of one of the two headset segments plus the jack segment. You can choose a headphone cord with a length of less than 46cm, as reported by scientists, to limit the phenomenon of 3 overlapping strands.
- Choosing a headphone cord with a large version also helps to limit this phenomenon.
The added mass also makes it more difficult for the cord to loop and twist, which are the main causes of tangling. Additionally, a thicker cord may be stiffer, which can help it retain its shape and resist tangling.
- Avoid overstuffing your pockets or bag.
When carrying your headphones, try not to overstuff your pockets or bag, as this can cause the wires to twist and tangle. Instead, store your headphones properly by placing them in a case or bag.
- Use wireless headphones.
Another option is to use wireless headphones, which eliminate the problem of tangled wires.
By following these tips, you will keep your headphone wires neat and tangle-free and avoid frustration when using them.
How to remove a tangled headphone cord?
Removing a tangled headphone cord can be a difficult task, but a few methods can help you untangle it quickly and easily. The most common method is to find the end of the tangled cord and gently pull it apart, slowly working your way through the knot. Here are some steps to remove a tangled headphone cord.
- Straighten out the cord.
Start by straightening out the cord as much as possible to create more space between the tangled wires.
- Find the knots.
Locate the knots in the cord and gently loosen them by pulling on the wires.
- Unwind the cord.
Hold one end of the cord and slowly unwind it, carefully separating the tangled wires. You can use your fingers or a pair of tweezers to help separate the wires.
- Avoid pulling on the wires.
Be careful not to pull too hard on the wires, as this can cause damage to the cord and increase the chances of it becoming tangled again.
- Repeat the process.
If the cord is still tangled, repeat the process until it is completely untangled. You can successfully remove a tangled headphone cord with patience and careful handling.
Remember to store your headphones properly to prevent future tangles. You can use a cord organizer or a cable winder or simply wrap the cords around your fingers before putting them away to keep them from becoming tangled again.
What causes tangled cords?
According to a report by Physics scientists from the University of California (USA), one of the scientific explanations for this phenomenon is the strings’ vibration. Moreover, the 3-strand Y-shaped design makes it easier to hook together to form annoying knots.
In particular, the report also shows that the short length of the headphone cord under 46cm is rarely tangled, but from 46cm to 150cm, this phenomenon is very likely to happen.
Conclusion
Through the above article, Integraudio has helped you find the answer for how to avoid your headphones wire from twisting/tangling. With these simple tips, you can avoid headphone cord tangles and enjoy a tangle-free listening experience. Say goodbye to frustration and hello to an enjoyable, stress-free listening experience!”
Don’t forget to like, share articles and follow Integraudio to stay updated with useful tech tips like these!
Hi, I’m Nhi Nguyen. I am a technical engineer and have many years of experience as a content writer. I’m hoping that my blog will serve as a resource for anyone else interested in learning more about technology equipment.